F1 Magnetic Level Switches
Showing all 8 results
-
F1 Ex-Proof
Description
F1 level switches are designed for applications where Ex-Proof conditions are required.
-
F1 I Type
Description
The operating range has been increased compared to the F1 Standard model by extending the float arm. This reduces the frequency of activation of pumps and solenoid valves.
-
F1 “L” Type
Description
F1-type level switches designed for top mounting on tanks or reservoirs.
-
F1 Mini Stainless
Description
“Normally Open” or “Normally Closed” dry contact level switches suitable for a 1/2″ threaded connection mounted on the side of the tank or reservoir. Suitable for use in open or low pressure tanks.
-
F1 Norm Flanged
Description
Flanged F1 type level switches made in DIN, ANSI, JIS, or special connection norms. In this way, it is possible to install the desired flange dimensions without changing the existing connection type.
-
F1 Standard
Description
They are equipment side-mounted to the tanks or reservoirs that allow receiving “Normally Open” or “Normally Closed” dry contacts at the points where change of level is desired without any external power supply.
-
F1 With Test Arm
Description
The version with a test arm allows performing operating tests mechanically without demounting the equipment or performing fill-discharge operations. It works according to the principle of float position changed by the test arm.
-
F1 “Z” Type
Description
It has been designed by taking into account the constructive differences between the point where the level control will be performed and the place where the device will be installed. It is especially used in asymmetric storage and differential applications encountered in the shipbuilding industry.
