Measurement & Control Equipment
Showing all 39 results
-
F1 Ex-Proof
Description
F1 level switches are designed for applications where Ex-Proof conditions are required.
-
F1 I Type
Description
The operating range has been increased compared to the F1 Standard model by extending the float arm. This reduces the frequency of activation of pumps and solenoid valves.
-
F1 “L” Type
Description
F1-type level switches designed for top mounting on tanks or reservoirs.
-
F1 Mini Stainless
Description
“Normally Open” or “Normally Closed” dry contact level switches suitable for a 1/2″ threaded connection mounted on the side of the tank or reservoir. Suitable for use in open or low pressure tanks.
-
F1 Norm Flanged
Description
Flanged F1 type level switches made in DIN, ANSI, JIS, or special connection norms. In this way, it is possible to install the desired flange dimensions without changing the existing connection type.
-
F1 Standard
Description
They are equipment side-mounted to the tanks or reservoirs that allow receiving “Normally Open” or “Normally Closed” dry contacts at the points where change of level is desired without any external power supply.
-
F1 With Test Arm
Description
The version with a test arm allows performing operating tests mechanically without demounting the equipment or performing fill-discharge operations. It works according to the principle of float position changed by the test arm.
-
F1 “Z” Type
Description
It has been designed by taking into account the constructive differences between the point where the level control will be performed and the place where the device will be installed. It is especially used in asymmetric storage and differential applications encountered in the shipbuilding industry.
-
LS20 Ex-Proof
Description
Designed for applications where Ex-Proof conditions are required. There are changeover switches that can receive “Normally Open” and “Normally Closed” contacts inside the body.
-
LS20 Flanged & Threaded
Description
Designed for closed tank applications suitable for flanged or threaded connection. There are changeover switches that can receive “Normally Open” and “Normally Closed” contacts inside the body.
-
LS20 Controller
Description
Developed for applications where high switching capacity is required. Using more than one controller, dry contact can be taken from up to 6 different points. Start-Stop operations are done via LS20 Controller.
-
LS20 With Cover
Description
The level switch is enclosed in a stainless steel protective case to protect it from impacts and damages that may occur in the working environment. Ideal for open tank application with connection suitable for screwing and welding.
-
LS20 Multi
Description
With the application of multiple floats and contacts, which can be designed according to the demands, multiple independent control points can be created, and easier control is provided by connecting to the automation system or existing control system.
-
LS20 Bilge Switch
Description
Designed for bilge and open tank applications. There are changeover switches that can receive “Normally Open” and “Normally Closed” contacts inside the body.
-
LS20 Thermostat Controller
Description
LS20 device with temperature and level control. There are changeover switches that can receive “Normally Open” and “Normally Closed” contacts inside the body.
-
LS20 Test Arm
Description
The version with a test arm allows performing operating tests mechanically without demounting the equipment or performing fill-discharge operations. It works according to the principle of float position changed by the test arm.
-
LS30
Description
Signal received from LS30 Level Controller is transmitted to LS30 Digital Controller and change of level may be monitored in percentagei volume, mass or distance units. Level info may be transmitted from the Digita Controller through 0-10V & 4-20mA analog input to PLC or automation system. Thus all desired controls may be performed from the automation program. Additionally, dry contact can be got via 3 relay output fixed in the controller. In this way, 3 different devices sych as notor, pump, valve or light-audio alarm may be operated.
-
LS30 Direct Output
Description
With the signal converter integrated with LS30 Level Controller, the level info is converted directly to 0-10V & 4-20mA analog signal. This may be connected to the automation system without having to use Digital Controller.
-
LS30 Ex-Proof
Description
They are certificated LS30 with sought fort Ex-Proof conditions. Signal received from LS30 Level Controller is transmitted to LS30 Digital Controller and change of level may be monitored in percentage,colume, mass or distance units. Level info may be transmitted from the Digital Controller through 0-10V & 4-20mA analog input to PLC or automation program. Additionally, dry contact can be got via 3 relay output fixed in the controller. In this way, 3 different devices such as motor, pump, valve or light-audio alarm may be operated.
-
LS30 Ex-Proof Direct Output
Description
They are certificated LS30 Direct Output with sought fort Ex-Proof conditions, With the signal converter integrated with LS30 Level Controller, the level info is converted directly to 0-10V & 4-20mA analog signal. This signal may be connected to the automation system without having controller.
-
LS40
Description
Signal received from LS40 Level Controller is transmitted to LS40 Digital Controller and change of level may be monitored in percentage, volume, mass or distance units. Level info may be transmitted from the Digital Controller through 0-10V & 4-20mA analog input to PLC or automation system. Thus all desired controls may be performed from the automation program. Additionally, dry contact can be got via3 relay output fixed in the controller. In this way, 3 different devices such as motor, pumpi valve or light-audio alarm may be operated.
-
LS40 Direct Output
Description
With the signal converter integrated with LS40 Level Controller, the level into is converted directly to 0-10V & 4-20mA analog signal. This signal may be connected to the automation system without having to use Digital Controller.
-
LS40 Ex-Proof
Description
They are certificated LS40 with sought fort Ex-Proof conditions. Signal received from LS40 Level Controller is transmitted to LS40 Digital Controller and change of level may be monitored in percentage, volume, mass or distance units. Level info may be transmitted fom the Digital Controller through 0-10V & 4-20mA analog input to PLC or automation system. Thus all desired controls may be performed from the automation program. Additionally, dry contact can be got via 3 relay output fixed in the controller. In this way, 3 different devices such as motor, pump, valve or light-audio alarm may be operated.
-
LS40 Ex-Proof Direct Output
Description
They are certificated LS40 Direct Output with sought fort Ex-Proof conditions. With the signal converter integrated with LS40 Level Controller, the level info is converted directly to 0-10V & 4-20mA analog signal. This signal may be connected to the automation system without having to use Digital Controller.
-
MLG 30 Direct Output
Description
MLG30 Direct Output Level Indicators convert level information directly to 0-10V & 4-20mA analog signal with signal converter. This signal can be connected to the automation system without the need to use the LS30 controller.
-
MLG Boiler Type
Description
They are magnetic level gauges designed for high pressure and temperature applications.
-
MLG With Scale
Description
There are percentage, volume or length values on the scale according to the tank or tank detail to be measured. PS series limit switches can be added to the scale model, and dry contact can be taken from the desired points.
-
MLG Standard
Description
Kayse MLG Type magnetic level indicator device is used for continuous measurement, monitoring and display of liquid level. The level change in the tank changes the level of the liquid in the bypass tube at the same rate, according to the principle of combined vessels. In this way, the magnetic float inside the level indicator moves, affecting the magnetic flaps on the outer surface of the bypass tube and causing it to rotate 180° around itself. As the liquid level increases, the white flaps turn red, and as the liquid level decreases, the red flaps turn white.
-
MLG Top Mounting
Description
It is designed for underground reservoir applications and top-mountable tanks. By attaching PS series limit switches, it is possible to get contact from any desired points.
-
MLG With Valve
Description
MLG Valved Level Gauges allow the level gauge to be removed without emptying the tank in cases requiring maintenance and renewal. With PS series limit switches, dry contact can be taken from desired points.
-
MLG-K30
Description
MLG-K30 series Magnetic Level Gauges can be monitored as percentage, volume, mass or distance from LS30 controller. Level information can be transferred to the automation system with 0-10V & 4-20 mA analog output. 3 different devices can be operated with 3 relay outputs.MLG Boiler Type Level gauges (MLG-K30) are level gauges designed for high pressure and temperature.
-
MLG-K30Direct Output
Description
They are magnetic level indicators designed for higher pressure applications than standard level indicators, where the fluid level can be monitored without the need for a controller, can be integrated into PLC systems, and can provide direct 0-10 V or 4-20 mA output.
-
MLG30
Description
MLG30 series Magnetic Level Gauges can be monitored as percentage, volume, mass or distance from LS30 controller. Level information can be transferred to the automation system with 0-10V & 4-20 mA analog output. 3 different devices can be operated with 3 relay outputs.
-
MLG30 Ex-Proof
Description
These are magnetic level indicators where the fluid level can be monitored via the controller supplied with the product in applications where Ex-Proof conditions are required and can be integrated into automation systems (RS 485, ModBus, etc.).
-
MLG30 Ex-Proof Direct Output
Description
They are magnetic level indicators that can monitor the fluid level without the need for a controller in applications where Ex-Proof conditions are required, can be integrated into PLC systems, and can provide direct 0-10 V or 4-20 mA output.
-
MS10 Series
Description
MS1x series, which has a wide usage area with its polypropylene or polyamide material structure, are level switches that can be “Normally Open” or “Normally Closed” contact. The tank can be mounted from the top or bottom.
-
MS20 & MS21
Description
Ideal for open or low-pressure tank applications with stainless steel float and body construction. MS20 & MS21 level switches with cable outlets and M10 connections can be easily mounted on metal or plastic tanks.
-
MS30 & MS31
Description
Has 1/2″ thread and a standard cable outlet. Ideal for open and low-pressure tank applications with stainless steel float and body construction. It can be easily mounted on metal or plastic tanks.
-
MS40 & MS41
Description
Has 1″ threaded connection, socket and cable outlet. Ideal for open or low-pressure tank applications with stainless steel float and body construction. It can be easily mounted on metal or plastic tanks.
